Silicone lamp strip refers to the LED lamp that is welded to the copper wire or ribbon flexible circuit board with a special processing technology, and then connected to the power supply to emit light. It is named because its shape is like a light strip when it emits light. Silicone lamp strips generally include round two wire, round three wire, flat three wire, flat four wire, etc; The colors are red, green, blue, yellow, white and colorful. Diameter: 10mm -- 16mm, widely used in building outlines, bridges, guardrails, hotels, stores, supermarkets, dance halls, advertising decoration places, etc.
2、 What are the main features and advantages of silicone lamp strips?
1） The silicone lamp strip is soft and can curl like a wire.
2.）Silicone lamp strips can be cut and extended.
3.）LED chips and circuits are completely covered in flexible plastic, with good insulation, waterproof performance and safe use.
4.）Silicone lamp strip has strong weather resistance.
5.）Silicone lamp strip is not easy to crack and has a long service life.
6.）The silicone lamp strip is easy to make shapes such as graphics and characters; At present, it has been widely used in decoration and lighting of buildings, bridges, roads, gardens, courtyards, floors, ceilings, furniture, cars, ponds, underwater, advertisements, signboards, signs, etc.
3、 How long is the life of LED silicone lamp strip?
Since LED is a constant current component, the constant current effect of LED light strips produced by different manufacturers is different, and the life span is therefore different. Of course, if the copper wire or flexible circuit board of the light bar has poor toughness, the life of the LED silicone light bar will also be affected.
4、 What are the precautions for LED silicone lamp strip during maintenance?
1.）Silicone lamp strip anti-static: because LED is a static sensitive element, if the anti-static measures are not taken when repairing the LED lamp strip, the LED will be burned, causing waste. It should be noted that the soldering iron must be anti-static, and the maintenance personnel must also take anti-static measures (such as wearing electrostatic rings and anti-static gloves).
2.）Continuous high temperature: LED and FPC, two important components of LED light strip, are products that cannot withstand high temperature continuously. If the FPC is in continuous high temperature or exceeds its bearing temperature, the FPC coating film will bubble, which will directly cause the LED light strip to be scrapped. At the same time, LED can not withstand high temperature continuously, and its chip will be burnt by high temperature after a long time under high temperature. Therefore, the soldering iron used in the maintenance of LED light strip must be a temperature control soldering iron, which limits the temperature to a certain range, and it is prohibited to change and set it randomly. (LED silica gel) In addition, even so, it should be noted that the soldering iron should not stay at the LED foot for more than 10 seconds during maintenance. If this time is exceeded, the LED chip may be burned.
If you have any questions about the LED flexible light strip, please consult the Chinese LED flexible light rope supplier seeposh.